TP-Link MC100CM 10/100Mbps Multi-Mode Media Converter - IEEE 802.3u, SC-Type, 1310nm 2km Multi-mode

TP-Link MC100CM Media Converter 10/100Mbps RJ45 to 100M multi-mode SC fiber up to 2km chassis mountableComplies with 802.3u 10/100Base-TX, 100Base-FX standardsLink Fault Passthrough and Far End Fault minimize the loss caused by link failure timelyProvides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX portExtends fiber distance up to 2kmWhat This Product DoesThe MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINKs 19system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.MEDIA CONVERTER & MODULEStandards and ProtocolsIEEE 802.3, IEEE 802.3u, IEEE 802.3xBasic FunctionHalf/Full-Duplex transfer mode for FX portFull Duplex Flow Control (IEEE 802.3x)Half Duplex Flow Control (Backpressure)Extends fiber distance up to 2kmLink Fault Passthrough and Far End Fault minimize the loss caused by link failure timelyPorts1 100M SC/UPC port1 100M RJ45 port (Auto MDI/MDIX)Wave Length1310nmNetwork Media 10BASE-TUTP category 3, 4, 5 cable (maximum 100m)EIA/TIA-568 100W STP (maximum 100m)Network Media 100BASE-TUTP category 5, 5e cable (maximum 100m)EIA/TIA-568 100W STP (maximum 100m)Network Media 100BASE-FXMulti-mode FiberLED IndicatorsPWR, FDX/Col, Link/Act, SPDDimensions (W*D*H)3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)Power SupplyExternal power supply