SINGER Piping / Cording Overlocker Presser Foot
SINGER Piping / Cording Overlocker Presser Foot
This Piping / Cording foot is used for sewing tape between two fabrics in one operation.
To Suit The Following Models: 14HD Series 14U Series. A change of shank is required. Shank needed is 554239 14SH SE017 How to use:Preparing your machine:
- Needle: Left or both left and right
- Stitch type: Three-thread overlock or four-thread overlock
- Stitch type: 2-4mm
- Differential feed lever: Normal position
- Upper knife: Working position
Sewing:
- Place fabric with the right sides facing.
- Place cording (piping) in between upper and lower fabrics and insert fabrics under the cording foot with cording positioned in the groove under the foot.
- Sew while guiding both cording (piping) and fabric.
Note: Cording (piping) using bias tape and cord can also be done with this foot.