Red Smoke Alarms 10 Year Rf Wireless Smoke Alarm

Red Smoke Alarms
Red Smoke Alarms 10 Year Rf Wireless Smoke Alarm
Red Smoke Alarms 10 Year Rf Wireless Smoke Alarm
Red Smoke Alarms 10 Year Rf Wireless Smoke Alarm

Model No: R10RF

A photoelectric, 10 year sealed lithium battery RF wireless smoke alarm. Interconnectable with up to 20 Red smoke alarms (240v hard wired and/or 10 year RF wireless smoke alarms) and includes a test/hush button and visual indicators. The R10RF smoke alarm is approved and certified to meet AS3786:2014 and is fully compliant to meet the Queensland 2022 smoke alarm legislation. The Red Smoke Alarm Controller can connect wirelessly to this smoke alarm.

Data Sheet: ;

Key Information

  • Supply: 3V DC Sealed Battery
  • Battery Type: Lithium Battery
  • Battery Life: 10 Year
  • Operating Current: < 100mA at 3V
  • Standby Power: < 0.04 mW
  • Detection type: Smoke
  • Function Available: Hush Function;Self-test of smoke detection;Local alarm
  • Control Type: Button for test/ hush function
  • Transmission Frequency: 433.92 MHz
  • Number of devices: up to 20pcs for wireless alarm
  • Operating Distance: 30m indoor use line of sight;100m in free field
  • Pairing delay range: 2 min maximum
  • Response time Approx: 8s
  • Noise level: 85 dB at 3m minimum
  • Time delay range: 10 min for hush;10 hr for do not disturb
  • Local Signal: Sound : Alarm;Sound : Signal;Visual : 1 LED (red for warning and low battery)
  • Type of installation: Indoor
  • Device Mounting: Surface
  • Mounting Support: Wall-mount;Ceiling
  • Fixing mode: By screws
  • Diameter: 140 mm
  • Height: 39 mm

Environment

  • Ambient air temperature for operation: 0...45oC
  • Relative humidity: 5...95%
  • Standards: AS 3786 : 2014 / amdt 2:2018

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.

This documentation is not intended as a substitute for and is not to be used for determining suitability of reliability of these products for specific user applications.

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.

Neither Red Smoke Alarms PTY. LTD nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.