ACA Overland Diff Breather Kit 4 Port For Holden Colorado Rg Models Silver Red

Diesel Manager AU
ACA Overland Diff Breather Kit 4 Port For Holden Colorado Rg Models Silver Red
ACA Overland Diff Breather Kit 4 Port For Holden Colorado Rg Models Silver Red

The following components are supplied with this universal kit

  • 1 x stainless steel mounting bracket with label attached. To mounted within the engine bay that will be always above the water level.
  • 2 x galvanized self tapping screws for mounting the bracket.
  • 4 x o-ring sealed bulkhead fittings.
  • 4 x breather / filters
  • 5 x o-ring sealed water-resistant push fittings, incl y fitting.
  • 4 x brass hose barbs / male - for easy connection to existing factory breather hose / lines if required.
  • 15 x cable ties, uv resistant.
  • 10 x meters 6mm-od hose.
  • 2 x corrugated protective sleeves 1 meter total combined length, to enclose breather hose at cable tie points if needed.
  • 1 x installation instructions.
  • Installation tips-due to difficulty in locating gearbox & transfer case breather positions on all vehicles this kit is to be installed by a qualified mechanic / workshop that has a hoist with safety equipment available.
  • Some transfer cases, gearboxs & diff housings will not have a threaded fitting for removal, they will have a pressed-in top cover / hat breather vent installed, in these cases a mechanic must install this kit as they will need to modify the pressed in top cover / hat breather to allow rubber hose to be connected and then allowing connection to your diff breather kits hose / fittings / brass hose barbs.
  • Please note additional components may be required to install this kit depending upon your vehicle application & series.
  • Please note diesel manager diff breather kits are to be installed by licenced workshop that has access to a hoist with safety equipment available.
  • Important note: it is the vehicle owners responsibility to check & maintain this kit after installation, example 1-check all hoses are always securely installed within the fittings in diffs, transfer case, gear box or transmission (all breather points) & bulkhead breather-filter fitting within the mounting bracket. 2-check breather-filters have not been damaged at all as this will allow dust, water & other unwanted contaminates to enter.