DECATHLON ROCKRIDER Mountain Bike Rigid Front & Rear Mudguard Kit V2 - 26"-27.5"-29"
This 26"" to 29"" front and rear bike mudguard kit was designed to protect the lower back, torso and face from mud splashes while mountain biking
LEVEL OF PROTECTIONThis wide, shock-resistant mudguard kit stops mud getting sprayed onto the rider's lower back, chest and face.For best results, position the rear mudguard blade as close as possible (2 to 3 cm) to the wheel.You can't completely avoid muddy splatters when it's damp...But for getting from A to B, we recommend using a hybrid bike mudguard kit (with longer blades that are closer to the wheels), if compatible with your bike frame and tyre width.
Bike compatibilityThis kit is suitable for 26"" to 29"" mountain bikes, with a tyre width up to 2.8"" in 27.5"" and 2.6"" in 29"", equipped with a telescopic fork.To ensure a good fit at the front, the internal diameter of the steerer tube must be between 18 and 34 mm.If the front blade interferes with the underside of the frame (for example in small sizes), it is possible to move the blade forward.To ensure a good fit at the rear, the diameter of the seat post must be between 25.4 and 34.9 mm.
BOX CONTENTSThe front mudguard comes fully assembled and ready to be mounted, with a 23 mm medium expansion socket.To make this product compatible with as many different telescopic forks as possible, there are 2 additional expansion sockets included in this kit: 1 smaller, 18 mm one and 1 bigger, 31 mm one.The rear mudguard comes fully assembled and ready to be mounted, no matter the diameter of your seat post.
A MODERN, EFFICIENT DESIGNWith dimensions that fit all the new wheel and tyre sizes on the market, and with a bold design, our mudguard kit gives your bike a modern, dynamic look.Everything has been designed to give you the best experience:- A reliable screw-on bracket that holds the mudguards in the same position each time- An easy system to clip the blades onto and take them off your bike depending on the weather- Compatibility with accessories (camera, lights)
Responsibly designedWe're committed to reducing the environmental impact of our new product, so we've paid special attention to the choice of materials for the bulkiest parts.the blades (front and rear) as well as the ""fuse"" arm (rear) are made of 100% recycled PP (polypropylene).
Compatible AccessoriesIn dry weather, when there's no rain and mud about, you can unclip the blade from the rear bracket and clip a sports camera on instead. The camera must be compatible with the GoPro bracket system.To keep you safe when riding early in the morning or late at night, there's a rail at the end of the rear blade that you can clip a rear, red light to: CL 100, CL 500, CL 900, ST 500 or RL 510 LED.
Dimensions and weightFront:Blade length: 553 mmBlade width: 73 to 97 mmTotal weight: 120 gRear:Blade length: 497 mmBlade width: 73 to 95 mmTotal weight: 230 g
It's very easy to mount / dismount. It clips to a screw-on bracket keeps its position setting and won't budge as you ride!
Non-messyThis kit effectively protects your lower back, chest and face from muddy spray
Easy assembly / dismantlingFits to its screwed-on brackets in just one click and keeps its position setting
Praline FlavourThis kit fits 26"" to 29"" mountain bikes with a telescopic fork
RobustnessThe rear features a ""fuse"" arm (that unclips) in case of high impacts
WeightFront weight: 120 gRear weight: 230 gTOTAL: 350g
This 26'''' to 29'''' front and rear bike mudguard kit was designed to protect the lower back torso and face from mud splashes while mountain biking
Non-messy
This kit effectively protects your lower back, chest and face from muddy spray
Easy assembly / dismantling
Fits to its screwed-on brackets in just one click and keeps its position setting
Praline Flavour
This kit fits 26" to 29" mountain bikes with a telescopic fork
Robustness
The rear features a "fuse" arm (that unclips) in case of high impacts
Weight
Front weight: 120 gRear weight: 230 gTOTAL: 350g