90cmX5m Sand Blast Clear Frosted Window Film Glass Removable Privacy Film

Product Information:

• Material: Environmental PVC
• UV protection: 90% Anti-UV
• Adhesive: Comes with adhesive on the back of Film
• Waterproof function: Waterproof
• Use: glass surfaces (such as windows, sliding doors, shopwindow)
• Usage: Decorative, heat insulation, anti-UV, protection of privacy, etc.
• Thickness: 0.08mm
  Width: 90cm
• Length: 5m ;
• Recognized fashion trend frosted windows glass privacy decorative film.
• No need to use glue, no need to change glass, easy to apply, block vision more effectively.
• Easy to apply for more privacy, easy to remove without leaving any sticky residue.
• Easily adheres straight to the glass, windows, mirror or any smooth surface
• Made with high quality, removable and waterproof vinyl.
• You will need:
  1 spray bottle filled with water and 2 drops of dishwashing detergent
  Credit card wrapped in a dust free cloth
  Squeegee if doing large area
  Stanley Knife to trim if necessary
  1. Before applying Frost & Co Window Film thoroughly clean the glass.
     Remove any spots of dried paint and wash with clean soapy water.
     Any dirt or lint on the glass will be trapped under the film and look unsightly.
     Do not use window cleaning spray, as it can damage the film.
  2. Spray the glass liberally with the water/detergent mix.
  3. Place your design on a flat surface.
     Carefully peel off the backing paper by pulling it flat back on itself.
  4. Spray the exposed surface of the film with water/detergent.
     Lightly spray your hands to stop the film sticking to them.
  5. Carefully pick up the laminate, and slide into position on your glass.
     Keep the film smooth. It will continue to move, providing the glass is wet.
     Reapply water if necessary.
  6. Once in place push out the bubbles with the credit card wrapped in a soft cloth. Push from the centre out.
  7. If you are doing a large area, spray the film with the water and use a squeegee.
     The water will allow the squeegee to glide over the film.
  8. Wipe away any excess water.
     There may be some water marks left on the film, however this will dry/evaporate over time.
  9. To trim if required: Sandwich the blade between the credit card and edge of frame.
     Run the Stanley knife down the edge using the credit card to push it against the frame.
  10. To remove bubbles gently pop with a pin and rub.
  11. To remove white crease marks, run the flame of a lighter over the film and rub with finger.

Package Include:

• 1 x Frosted Window Glass Film

;